What is the setting range of Mazak parameter L38?

0 to 9999. A changed value takes effect: At power on.

PARAMMachine parameter · TABLE (L)

L38

M/B-code for index of index table

Q: What does Mazak parameter L38 do?

L38 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). M/B-code for index of index table. For the command to rotate the index table, select the turning direction and the M-code number to be output. 0 or 1: B-code (0: Turning in the direction of CW, 1: Turning in the direction of CW/CCW/shortcut) 2 to 9999: M-code (Numeric value is the M-code number to be Note : 1. This parameter is ineffective for the system with an NC rotary table. 2. Turning direction of the index table can be selected in the indexing unit only when this parameter is set to 1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

For the command to rotate the index table, select the turning direction and the M-code number to be output. 0 or 1: B-code (0: Turning in the direction of CW, 1: Turning in the direction of CW/CCW/shortcut) 2 to 9999: M-code (Numeric value is the M-code number to be Note : 1. This parameter is ineffective for the system with an NC rotary table. 2. Turning direction of the index table can be selected in the indexing unit only when this parameter is set to 1.

Setting

Setting range0 to 9999

Unit—

Program typeM

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 471. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →