What is the setting range of Mazak parameter L39?

0, 1. A changed value takes effect: At power on.

PARAMMachine parameter · TABLE (L)

L39

Selection of execution/non execution of indexing unit

Q: What does Mazak parameter L39 do?

L39 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of execution/non execution of indexing unit. Specify the execution condition of the indexing unit. Execution of the indexing unit just before starting of machining of each tool sequence or at the end of each process: 0: Won’t be made when the index angle is the same as the preceding indexing unit execution. 1: Will be made unconditionally.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the execution condition of the indexing unit. Execution of the indexing unit just before starting of machining of each tool sequence or at the end of each process: 0: Won’t be made when the index angle is the same as the preceding indexing unit execution. 1: Will be made unconditionally.

Setting

Setting range0, 1

Unit—

Program typeM

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 471. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →