What is the setting range of Mazak parameter L41?

0 to 2. A changed value takes effect: At power on.

PARAMMachine parameter · TABLE (L)

L41

Simultaneous operation of indexing unit with ATC

Q: What does Mazak parameter L41 do?

L41 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Simultaneous operation of indexing unit with ATC. For execution of the indexing unit, specify the commanding order for movement to turning position, turning of the table and ATC. 0: Movement to turning position  Table turning  ATC 1: Movement to turning position  Table turning and ATC 2: Movement to turning position, table turning and ATC simultaneously take place. Note : In case of setting to 2, only the X-axis coordinates can be set at turning position of the indexing unit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

For execution of the indexing unit, specify the commanding order for movement to turning position, turning of the table and ATC. 0: Movement to turning position  Table turning  ATC 1: Movement to turning position  Table turning and ATC 2: Movement to turning position, table turning and ATC simultaneously take place. Note : In case of setting to 2, only the X-axis coordinates can be set at turning position of the indexing unit.

Setting

Setting range0 to 2

Unit—

Program typeM

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 72, 471. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →