What is the setting range of Mazak parameter L44?

0 to 2. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L44

Selection of automatic setting on/off for nose position correction of a drilling tool

Q: What does Mazak parameter L44 do?

L44 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of automatic setting on/off for nose position correction of a drilling tool. Select whether automatic setting of the amount of tool nose position correction is to be made valid or invalid when entering the nose angle of a drilling tool in the tool data or when measuring the tool. 0: Automatic setting valid When the tool nose angle is specified: The amount of correction that is appropriate for the specified angle is auto-set. When the tool nose angle is not specified: The amount of correction is not auto-set. 1: Automatic setting invalid 2: Automatic setting valid When the tool nose angle is specified: The amount of correction that is appropriate for the specified angle is auto-set. When the tool nose angle is not specified: The amount of correction that assumes a nose angle of 118° is auto-set.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Select whether automatic setting of the amount of tool nose position correction is to be made valid or invalid when entering the nose angle of a drilling tool in the tool data or when measuring the tool. 0: Automatic setting valid When the tool nose angle is specified: The amount of correction that is appropriate for the specified angle is auto-set. When the tool nose angle is not specified: The amount of correction is not auto-set. 1: Automatic setting invalid 2: Automatic setting valid When the tool nose angle is specified: The amount of correction that is appropriate for the specified angle is auto-set. When the tool nose angle is not specified: The amount of correction that assumes a nose angle of 118° is auto-set.

Setting

Setting range0 to 2

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 72, 472. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →