Index table angle command

Q: What does Mazak parameter L45 do?

L45 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Index table angle command. Set the minimum unit of index table angle command for the indexing units, ANGLE in the end units and B-codes in the manual program unit. 0: 1° 1 to 8: 1/1000° (auxiliary equipment axis specifications) Note : Index table angle display on the POSITION display is valid only when L43 = 1 (index table angle display on). 0: 1° index table 1 to 7: Nth axis under auxiliary equipment axis specs. (N = 1 to 7) 8: Positioning table

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the minimum unit of index table angle command for the indexing units, ANGLE in the end units and B-codes in the manual program unit. 0: 1° 1 to 8: 1/1000° (auxiliary equipment axis specifications) Note : Index table angle display on the POSITION display is valid only when L43 = 1 (index table angle display on). 0: 1° index table 1 to 7: Nth axis under auxiliary equipment axis specs. (N = 1 to 7) 8: Positioning table

Setting

Setting range0 to 8

Unit—

Program type—

Takes effect—

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 72, 472. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →