What is the setting range of Mazak parameter L46?

0 to 255. A changed value takes effect: At power on.

PARAMMachine parameter · TABLE (L)

L46

Maximum number of pallets in pallet changing unit

Q: What does Mazak parameter L46 do?

L46 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum number of pallets in pallet changing unit. Select change or no change of the pallet and specify the maximum number of pallets. 0 or 1: Not to change pallet 2 to 255: To change pallet (Numeric value indicates the maximum Note : When this parameter is set to 0 or 1, use of the pallet changing unit is prohibited.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Select change or no change of the pallet and specify the maximum number of pallets. 0 or 1: Not to change pallet 2 to 255: To change pallet (Numeric value indicates the maximum Note : When this parameter is set to 0 or 1, use of the pallet changing unit is prohibited.

Setting

Setting range0 to 255

Unit—

Program typeM

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 72, 473. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →