What is the setting range of Mazak parameter L5?

0 to ±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

Z-axis stroke for tip position memory (TEACH function)

Q: What does Mazak parameter L5 do?

L5 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Z-axis stroke for tip position memory (TEACH function). The distance from the spindle taper gage line to the table surface, No. 1 turning spindle chuck edge, or the reference block on the pallet existing when the Z-axis is in the machine zero-point position Machine zero point (Horizontal composite machine) (Vertical composite machine)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The distance from the spindle taper gage line to the table surface, No. 1 turning spindle chuck edge, or the reference block on the pallet existing when the Z-axis is in the machine zero-point position Machine zero point (Horizontal composite machine) (Vertical composite machine)

Setting

Setting range0 to ±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 70, 463. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →