What is the setting range of Mazak parameter L6?

0 to ±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

Tool-breakage judgment distance for TBR function

Q: What does Mazak parameter L6 do?

L6 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Tool-breakage judgment distance for TBR function. The minimum tool displacement by which the tool is judged to be a broken one as a result of execution of the tool breakage detection function If | registered tool length data – tool length data that has been measured during the detecting operation | > L6, then the tool is judged broken.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The minimum tool displacement by which the tool is judged to be a broken one as a result of execution of the tool breakage detection function If | registered tool length data – tool length data that has been measured during the detecting operation | > L6, then the tool is judged broken.

Setting

Setting range0 to ±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 70, 463. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →