What is the setting range of Mazak parameter L64?

0 to ±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L64

Head relay point X2

Q: What does Mazak parameter L64 do?

L64 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Head relay point X1. When FIXED is selected at the item RELAY in the 5-face machining unit or face definition unit, the head arrives at the face for next machining via the point(s) specified by the parameters. (To be set in the machine coordinate system) For AGX or machining models that use 5-face machining units, the relay points (X1, Y1) and (X2, Y2) can be specified in the program (in the 5-face machining unit or face definition sequence). For the five surface machining, the head goes through the four corners of a face where the two specified points are positioned in its diagonal line. Note : Set the rela y points so that parameter settings become L62 < L64 and L63 < L65.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Head relay point X1

When FIXED is selected at the item RELAY in the 5-face machining unit or face definition unit, the head arrives at the face for next machining via the point(s) specified by the parameters. (To be set in the machine coordinate system) For AGX or machining models that use 5-face machining units, the relay points (X1, Y1) and (X2, Y2) can be specified in the program (in the 5-face machining unit or face definition sequence). For the five surface machining, the head goes through the four corners of a face where the two specified points are positioned in its diagonal line. Note : Set the rela y points so that parameter settings become L62 < L64 and L63 < L65.

Setting

Setting range0 to ±99999999

Unit0.0001 mm/0.00001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 72, 477. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →