What is the setting range of Mazak parameter L66?

0, 1. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L66

Return/No return to head indexing point Z

Q: What does Mazak parameter L66 do?

L66 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Return/No return to head indexing point Z. After EIA/ISO subprogram execution; 0: Return to head indexing point Z (Even if the T-code command is for the same tool.) 1: No return to head indexing point Z

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

After EIA/ISO subprogram execution; 0: Return to head indexing point Z (Even if the T-code command is for the same tool.) 1: No return to head indexing point Z

Setting

Setting range0, 1

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 72, 478. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →