What is the setting range of Mazak parameter L7?

0 to 3. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

Tool-breakage restoration mode for TBR function (for M35 external tool breakage detection or tool measurement unit)

Q: What does Mazak parameter L7 do?

L7 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Tool-breakage restoration mode for TBR function (for M35 external tool breakage detection or tool measurement unit). Selects the restoration operation to be executed when the tool is judged broken upon executing the external tool breakage detection function (M35) or tool measurement unit. 0: Continue machining 1: Single-block stop occurs 2: Continue machining from the next process, or executing the end unit when there is only one process or when the machining for the last process is being executed. 3: After stopping in single block mode, continue machining from the next process, or execute the end unit when there is only one process or when the machining for the last process is being executed. Note : 1. When “2” is set for this parameter, the operation is equivalent to that for the setting of “0” upon executing a tool measurement unit. 2. When “3” is set for this parameter, the operation is equivalent to that for the setting of “1” upon executing a tool measurement unit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Selects the restoration operation to be executed when the tool is judged broken upon executing the external tool breakage detection function (M35) or tool measurement unit. 0: Continue machining 1: Single-block stop occurs 2: Continue machining from the next process, or executing the end unit when there is only one process or when the machining for the last process is being executed. 3: After stopping in single block mode, continue machining from the next process, or execute the end unit when there is only one process or when the machining for the last process is being executed. Note : 1. When “2” is set for this parameter, the operation is equivalent to that for the setting of “0” upon executing a tool measurement unit. 2. When “3” is set for this parameter, the operation is equivalent to that for the setting of “1” upon executing a tool measurement unit.

Setting

Setting range0 to 3

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 464. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →