What is the setting range of Mazak parameter L70?

1, 0. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L70

Axis movement from machining face on escapement

Q: What does Mazak parameter L70 do?

L70 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Axis movement from machining face on escapement. Specify the axes that simultaneously move from a machining face to the next machining face or in case of tool replacement. 0: Two (three) axes simultaneously move to the safety position. 1: Y-axis (or X- and Y-axes) moves to the safety position after Z-axis moved. The X-axis moves when a relay point (RELAY) or a fixed point (FIXED) is selected for the item RELAY in the face definition unit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the axes that simultaneously move from a machining face to the next machining face or in case of tool replacement. 0: Two (three) axes simultaneously move to the safety position. 1: Y-axis (or X- and Y-axes) moves to the safety position after Z-axis moved. The X-axis moves when a relay point (RELAY) or a fixed point (FIXED) is selected for the item RELAY in the face definition unit.

Setting

Setting range1, 0

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 73, 479. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →