What is the setting range of Mazak parameter L73?

0 to 56 (unit: ms). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · TABLE (L)

L73

Time constant for shape correction acceleration/deceleration filter 2

Q: What does Mazak parameter L73 do?

L73 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Time constant for shape correction acceleration/deceleration filter 2. Set the time constant to be used when shape correction is on. A setting of 0 is invalid.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the time constant to be used when shape correction is on. A setting of 0 is invalid.

Setting

Setting range0 to 56

Unitms

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 73, 479. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →