What is the setting range of Mazak parameter L74?

1 to 999999 (unit: mm/min). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · TABLE (L)

L74

Cutting feed rate for pre-interpolational acceleration/deceleration control

Q: What does Mazak parameter L74 do?

L74 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Cutting feed rate for pre-interpolational acceleration/deceleration control. Set the cutting feed rate for pre-interpolational acceleration/deceleration control.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the cutting feed rate for pre-interpolational acceleration/deceleration control.

Setting

Setting range1 to 999999

Unitmm/min

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 73, 480. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →