What is the setting range of Mazak parameter L76?

0 to 5000 (unit: %). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · TABLE (L)

L76

Acceleration rate for high-speed cutting

Q: What does Mazak parameter L76 do?

L76 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Acceleration rate for high-speed cutting. Set the maximum cutting speed in the G61.1 mode at percentage to the maximum cutting speed in the G64 mode. Input of 0 is regarded as 100%. 1000 or higher percent is disposed as 1000%.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the maximum cutting speed in the G61.1 mode at percentage to the maximum cutting speed in the G64 mode. Input of 0 is regarded as 100%. 1000 or higher percent is disposed as 1000%.

Setting

Setting range0 to 5000

Unit%

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 73, 480. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →