What is the setting range of Mazak parameter L79?

0 to 255 (unit: 0.001 mm). A changed value takes effect: At power on.

PARAMMachine parameter · TABLE (L)

L79

In-position width for changeover of the synchronized-tapping gain

Q: What does Mazak parameter L79 do?

L79 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). In-position width for changeover of the synchronized-tapping gain. Set the In-position width for changeover of the synchronized-tapping gain. If 0 is set, 10 microns will be regarded as having been set.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the In-position width for changeover of the synchronized-tapping gain. If 0 is set, 10 microns will be regarded as having been set.

Setting

Setting range0 to 255

Unit0.001 mm

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 73, 481. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →