What is the setting range of Mazak parameter L8?

0 to 99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

Skipping stroke limit for MMS

Q: What does Mazak parameter L8 do?

L8 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Skipping stroke limit for MMS. The maximum skipping movement distance for the measurement with the MMS unit An alarm message will appear if the touch sensor has not come into contact with the workpiece within this distance.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The maximum skipping movement distance for the measurement with the MMS unit An alarm message will appear if the touch sensor has not come into contact with the workpiece within this distance.

Setting

Setting range0 to 99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 464. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →