What does Mazak parameter L80 do?

L80 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Linear to arc deceleration rate. Set the deceleration rate at the linear to arc or arc to linear blocks of shape correction.

What is the setting range of Mazak parameter L80?

0 to 99999999 (unit: mm/min / in/min). A changed value takes effect: After stop of axis movement.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · TABLE (L)

L80

Linear to arc deceleration rate

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the deceleration rate at the linear to arc or arc to linear blocks of shape correction.

Setting

Setting range0 to 99999999

Unitmm/min / in/min

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 73, 481. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →