What is the setting range of Mazak parameter L9?

0, 1. A changed value takes effect: At power on.

PARAMMachine parameter · TABLE (L)

Selection of random ATC specifications

Q: What does Mazak parameter L9 do?

L9 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of random ATC specifications. Set to 1 when the machine of the random ATC specifications is used. 0: Standard machine 1: Machine of random ATC specifications

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set to 1 when the machine of the random ATC specifications is used. 0: Standard machine 1: Machine of random ATC specifications

Setting

Setting range0, 1

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 464. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →