What is the setting range of Mazak parameter L94?

0, 1. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L94

X/Y travel distance during EIA-programmed tool measurement

Q: What does Mazak parameter L94 do?

L94 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). X/Y travel distance during EIA-programmed tool measurement. The X/Y travel distance can be set during the selection of EIA-programmed fully automatic tool length measurement with the measuring table. 0: Invalid 1: Valid Note : It is invalid to set this parameter under laser tool measuring equipment specifications.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The X/Y travel distance can be set during the selection of EIA-programmed fully automatic tool length measurement with the measuring table. 0: Invalid 1: Valid Note : It is invalid to set this parameter under laser tool measuring equipment specifications.

Setting

Setting range0, 1

Unit—

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 485. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →