What is the setting range of Mazak parameter L96?

0 to 4000. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L96

Amount of shifting during offset number auto-setting for EIA-programmed tool measurement

Q: What does Mazak parameter L96 do?

L96 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Amount of shifting during offset number auto-setting for EIA-programmed tool measurement. The amount of shifting for TNo. during offset number auto-setting for EIA-programmed tool measurement data setting. [Offset No.] = [TNo. setting] + [L96 setting] Note : Valid only when L95 = 1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The amount of shifting for TNo. during offset number auto-setting for EIA-programmed tool measurement data setting. [Offset No.] = [TNo. setting] + [L96 setting] Note : Valid only when L95 = 1.

Setting

Setting range0 to 4000

Unit—

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 74, 486. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →