What does Mazak parameter M10 do?

M10 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Command unit. Select a unit of command from the following table and set it. – 10000 1000 100 10 1 2° index 20000 2000 200 20 2 5° index 50000 5000 500 50 5

What is the setting range of Mazak parameter M10?

1 to 50000. A changed value takes effect: At power on.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · FEED VEL. (M)

M10

Command unit

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Command unit

Select a unit of command from the following table and set it. – 10000 1000 100 10 1 2° index 20000 2000 200 20 2 5° index 50000 5000 500 50 5

Setting

Setting range1 to 50000

Unit—

Program typeE

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 78, 507. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →