What does Mazak parameter M12 do?

M12 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Coding of incremental axis. Register the incremental axes respectively in hexadecimal numbers of the ASCII code.

What is the setting range of Mazak parameter M12?

&0 to &7F. A changed value takes effect: At power on.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · FEED VEL. (M)

M12

Coding of incremental axis

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Setting

Setting range&0 to &7F

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 78, 508. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →