What is the setting range of Mazak parameter M13?

&0 to &FFFF. A changed value takes effect: Immediate.

PARAMMachine parameter · FEED VEL. (M)

M13

Axis name (for display)

Q: What does Mazak parameter M13 do?

M13 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Axis name (for display). Specify the address name of the axes to be used for display, by the appropriate hexadecimal number of the ASCII code. For reverse display, set up the most significant bit. Example : 1. Reverse display of “C” C : &0043  Reverse display of “C”: &00C3 2. Reverse display of “X1” X1 : &5831  Reverse display of “X1”: &D831

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the address name of the axes to be used for display, by the appropriate hexadecimal number of the ASCII code. For reverse display, set up the most significant bit. Example : 1. Reverse display of “C” C : &0043  Reverse display of “C”: &00C3 2. Reverse display of “X1” X1 : &5831  Reverse display of “X1”: &D831

Setting

Setting range&0 to &FFFF

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 78, 508. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →