What is the setting range of Mazak parameter M15?

&0 to &7F. A changed value takes effect: Immediate.

PARAMMachine parameter · FEED VEL. (M)

M15

Axis name (for axis name changing)

Q: What does Mazak parameter M15 do?

M15 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Axis name (for axis name changing). Specify the name of the address to be used for axis name changing (G110), by the appropriate hexadecimal number of the ASCII code.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the name of the address to be used for axis name changing (G110), by the appropriate hexadecimal number of the ASCII code.

Setting

Setting range&0 to &7F

Unit—

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 78, 509. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →