‹ALARMSMazatrol Assistant
PARAMMachine parameter · FEED VEL. (M)
M17

Axis control flag

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does

Axis control flag

Setting
Setting rangeBinary, eight digits
Unit—
Program typeM, E
Takes effectAt power on
Bit settings — M17 is set bit by bit
  1. bit 0

    —

    Takes effect: At power on

  2. bit 1

    Unit of output from MCP to servo amplifier

    Takes effect: At power on

  3. bit 2

    Direction of machine zero-point return

    Takes effect: At power on

  4. bit 3

    Error correction schema with servo on

    Takes effect: At power on

  5. bit 4

    Type of axis

    Takes effect: At power on

  6. bit 5

    Rotational direction of servo motor (for movement in (+) direction)

    Takes effect: At power on

  7. bit 6

    —

    Takes effect: At power on

  8. bit 7

    Alarm/No alarm with axis removed

    Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 78, 509. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →