‹ALARMSMazatrol Assistant
PARAMMachine parameter · FEED VEL. (M)
M18

FEED VEL. bit settings (7 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — M18 is set bit by bit
  1. bit 0

    Spindle C-axis

    0: Motor type with frame 1: Built-in type

    Range 0, 1 · Takes effect: At power on

  2. bit 2

    Machine zero-point position

    0: Fixed point for zero-point return using dog 1: Position existing when power was turned on

    Range 0, 1 · Takes effect: At power on

  3. bit 3

    Virtual axis with dog

    Set the axis to perform virtual dog-type zero-point return. 0: Invalid 1: Valid

    Range 0, 1 · Takes effect: After stop of movement

  4. bit 4

    Dog-less axis

    0: Invalid 1: Valid

    Range 0, 1 · Takes effect: At power on

  5. bit 5

    X-axis current position display in radius/diameter

    0: Radius 1: Diameter

    Range 0, 1 · Takes effect: At power on

  6. bit 6

    Automatic/manual simultaneous absolute-value updating

    0: Invalid 1: Valid

    Range 0, 1 · Takes effect: At power on

  7. bit 7

    Absolute-value detection

    0: Invalid 1: Valid 0 Dog type Simplified detection position SV17 bit 7 1 Dog type Absolute detection position

    Range 0, 1 · Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 78, 510, 511. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →