What is the setting range of Mazak parameter M2?

0 to 600000 (unit: mm/min (°/min)). A changed value takes effect: After stop of movement.

PARAMMachine parameter · FEED VEL. (M)

Feed rate for initial zero-point return

Q: What does Mazak parameter M2 do?

M2 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Feed rate for initial zero-point return. The feed rate for moving each axis during initial zero-point return (reference-point return) at power on Feed rate M2 N8

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The feed rate for moving each axis during initial zero-point return (reference-point return) at power on Feed rate M2 N8

Setting

Setting range0 to 600000

Unitmm/min (°/min)

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 77, 505. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →