FEED VEL. bit settings (8 bits)

1. bit 0

   Rotational direction of the rotation axis (Dynamic offset )

   0: Forward 1: Reverse

   Range 0, 1 · Takes effect: At power on

2. bit 1

   KOMET tool axis specification

   0: Normal 1: KOMET tool axis

   Range 0, 1 · Takes effect: At power on

3. bit 2

   Method of jog/rapid feed stopping when the INTELLIGENT SAFETY SHIELD is valid

   0: With the ISS being selected, the stop is delayed by about 140 ms than otherwise. Example : The stop position for combining the tailstock or steady rest will be shifted accordingly. 1: Independently of whether the ISS is selected or canceled, the axis movement will come to a stop in one and the same position. Example : Independently of the ISS, the stop for combining the tailstock or steady rest will occur in one and the same position. Changing the parameter setting from 0 to 1, therefore, must be followed by a readjustment of the combining position.)

   Range 0, 1 · Takes effect: At power on

4. bit 3

   Current position display of NC steady rest axis

   Select the method of displaying the current position of NC steady rest axis. 0: Display the value considering the reference workpiece zero point (S23) and WPC-Z. 1: Display the same value as the machine position. * This is valid for current position display on the POSITION, VIRTUAL MACHINING and TOOL PATH CHECK displays.

   Range 0, 1 · Takes effect: At power on

5. bit 4

   Warning check for alarm 67 HI-SPEED SYNCTAP AXIS ALARM

   0: Include 1: Do not include

   Range 0, 1 · Takes effect: At power on

6. bit 5

   Multi-axis integrated type amplifier specification

   0: Normal 1: Multi-axis integrated type amplifier

   Takes effect: At power on

7. bit 6

   Switching between zero-point shift amount and grid shift amount

   This parameter determines the use of parameter M16. 0: Use parameter M16 for zero-point shift amount. 1: Use parameter M16 for grid shift amount.

   Range 0, 1 · Takes effect: At power on

8. bit 7

   GL-axis specification

   0: Normal 1: GL-axis

   Range 0, 1 · Takes effect: At power on

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 79, 513, 514. Reference and explanation only — not a reproduction of the manual.