‹ALARMSMazatrol Assistant
PARAMMachine parameter · FEED VEL. (M)
M21

FEED VEL. bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — M21 is set bit by bit
  1. bit 0

    Rapid-feed acceleration/deceleration type, Linear acceleration/deceleration

    Takes effect: At power on

  2. bit 1

    Rapid-feed acceleration/deceleration type, First-order lag

    Takes effect: At power on

  3. bit 2

    Rapid-feed acceleration/deceleration type, Second-order lag

    Takes effect: At power on

  4. bit 3

    Rapid-feed acceleration/deceleration type, Exponential acceleration/linear deceleration

    Takes effect: At power on

  5. bit 4

    Cutting-feed acceleration/deceleration type, Linear acceleration/deceleration

    Takes effect: At power on

  6. bit 5

    Cutting-feed acceleration/deceleration type. First-order lag

    Takes effect: At power on

  7. bit 6

    Cutting-feed acceleration/deceleration type, Second-order lag

    Takes effect: At power on

  8. bit 7

    Cutting-feed acceleration/deceleration type, Exponential acceleration/linear deceleration

    Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 79, 515. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →