What does Mazak parameter M22 do?

M22 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). 7 bit settings.

What is the setting range of Mazak parameter M22?

Binary, eight digits. A changed value takes effect: At power on.

Which bits does Mazak parameter M22 have?

Bit 0: Deceleration time constant for rapid-feed exponential acceleration/linear deceleration Bit 1: Type of stroke-end stop Bit 2: Type of stroke-end stop Bit 3: — Bit 4: — Bit 5: — Bit 7: —

‹ALARMSMazatrol Assistant

PARAMMachine parameter · FEED VEL. (M)

M22

FEED VEL. bit settings (7 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — M22 is set bit by bit

bit 0
Deceleration time constant for rapid-feed exponential acceleration/linear deceleration
Takes effect: At power on
bit 1
Type of stroke-end stop
Takes effect: At power on
bit 2
Type of stroke-end stop
Takes effect: At power on
bit 3
—
Takes effect: At power on
bit 4
—
Takes effect: At power on
bit 5
—
Takes effect: At power on
bit 7
—
Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 79, 80, 515. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →