What is the setting range of Mazak parameter M27?

0 to 5000 (unit: mm/min). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · FEED VEL. (M)

M27

Optimum acceleration control: Target speed

Q: What does Mazak parameter M27 do?

M27 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Optimum acceleration control (Target speed). Set the value that determines the maximum allowable value (Amax) of the acceleration that occurs between blocks. Amax = × 60 × 1000 × (mm/ms2) Note : If M27 = 0, M27 is regarded as equal to M1 (rapid feed rate). If N25 = 0, N25 is regarded as equal to N1 (rapid feed time constant)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Optimum acceleration control (Target speed)

Set the value that determines the maximum allowable value (Amax) of the acceleration that occurs between blocks. Amax = × 60 × 1000 × (mm/ms2) Note : If M27 = 0, M27 is regarded as equal to M1 (rapid feed rate). If N25 = 0, N25 is regarded as equal to N1 (rapid feed time constant)

Setting

Setting range0 to 5000

Unitmm/min

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 80, 517. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →