What is the setting range of Mazak parameter M3?

0 to 600000 (unit: mm/min (°/min)). A changed value takes effect: After stop of movement.

PARAMMachine parameter · FEED VEL. (M)

Cutting feed rate limit

Q: What does Mazak parameter M3 do?

M3 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Cutting feed rate limit. The limit of cutting feed rate during automatic operation Even if a feed rate higher than this parameter setting is specified, the latter governs.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The limit of cutting feed rate during automatic operation Even if a feed rate higher than this parameter setting is specified, the latter governs.

Setting

Setting range0 to 600000

Unitmm/min (°/min)

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 77, 505. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →