What is the setting range of Mazak parameter M33?

0 to 99999999 (unit: mm/min / °/min). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · FEED VEL. (M)

M33

Safety speed for Safety supervisory mode 3

Q: What does Mazak parameter M33 do?

M33 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Safety speed (Safety supervisory mode 3). Set the safety speed to be used in safety supervisory mode 3. If the operating speed of the axis exceeds the set value in safety supervisory mode 3, this will cause a safety supervisory alarm and result in an emergency stop. (Assign a value greater than that of parameter M32 to parameter M33.)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Safety speed (Safety supervisory mode 3)

Set the safety speed to be used in safety supervisory mode 3. If the operating speed of the axis exceeds the set value in safety supervisory mode 3, this will cause a safety supervisory alarm and result in an emergency stop. (Assign a value greater than that of parameter M32 to parameter M33.)

Setting

Setting range0 to 99999999

Unitmm/min / °/min

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 80, 519. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →