What is the setting range of Mazak parameter M35?

0 to 99999999 (unit: mm/min / °/min). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · FEED VEL. (M)

M35

Safety clamping speed for Safety supervisory mode 3

Q: What does Mazak parameter M35 do?

M35 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Safety clamping speed (Safety supervisory mode 3). Set the safety clamping speed to be used in safety supervisory mode 3. In safety supervisory mode 3 and while a safety clamping request is in effect, operation decelerates to the set speed. (Assign a value smaller than that of parameter M33 to parameter M35.)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Safety clamping speed (Safety supervisory mode 3)

Set the safety clamping speed to be used in safety supervisory mode 3. In safety supervisory mode 3 and while a safety clamping request is in effect, operation decelerates to the set speed. (Assign a value smaller than that of parameter M33 to parameter M35.)

Setting

Setting range0 to 99999999

Unitmm/min / °/min

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 80, 519. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →