What does Mazak parameter M36 do?

M36 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Speed supervisory door selection (Safety supervisory mode). Set to which door group the axis belongs in safety supervisory mode.

What is the setting range of Mazak parameter M36?

0 to 99999999. A changed value takes effect: After stop of axis movement.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · FEED VEL. (M)

M36

Speed supervisory door selection

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Speed supervisory door selection (Safety supervisory mode)

Set to which door group the axis belongs in safety supervisory mode.

Setting

Setting range0 to 99999999

Unit—

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 80, 519. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →