What is the setting range of Mazak parameter M37?

0 to 99999999 (unit: %). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · FEED VEL. (M)

M37

Safety clamping speed reduction judgment coefficient

Q: What does Mazak parameter M37 do?

M37 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Safety clamping speed reduction judgment coefficient (Safety supervisory mode). A speed clamping signal is output after the axis has decelerated to the clamping speed. This parameter specifies to what additional percentage of the safety clamping speed the axis is to be decelerated as the output timing of the speed clamping signal. If 0 is set, the speed clamping signal will be output when the axis decelerates to a 10% additional speed (i.e., 110% of the safety clamping speed).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Safety clamping speed reduction judgment coefficient (Safety supervisory mode)

A speed clamping signal is output after the axis has decelerated to the clamping speed. This parameter specifies to what additional percentage of the safety clamping speed the axis is to be decelerated as the output timing of the speed clamping signal. If 0 is set, the speed clamping signal will be output when the axis decelerates to a 10% additional speed (i.e., 110% of the safety clamping speed).

Setting

Setting range0 to 99999999

Unit%

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 80, 520. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →