What is the setting range of Mazak parameter M42?

0 to 99999999 (unit: 0.0001 mm/0.0001°). A changed value takes effect: At power on.

PARAMMachine parameter · FEED VEL. (M)

M42

Interference check distance for INTELLIGENT SAFETY SHIELD during automatic operation

Q: What does Mazak parameter M42 do?

M42 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Interference check distance for INTELLIGENT SAFETY SHIELD during automatic operation. Set the machine interference check distance for INTELLIGENT SAFETY SHIELD during automatic operation Note : The same value as that of the primary parallel driving control axis should be assigned to the secondary axis.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the machine interference check distance for INTELLIGENT SAFETY SHIELD during automatic operation Note : The same value as that of the primary parallel driving control axis should be assigned to the secondary axis.

Setting

Setting range0 to 99999999

Unit0.0001 mm/0.0001°

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 80, 521. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →