What is the setting range of Mazak parameter M66?

0 to 255 (unit: mm/min). A changed value takes effect: Immediate.

PARAMMachine parameter · FEED VEL. (M)

M66

Variable acceleration control: Cutting feed rate

Q: What does Mazak parameter M66 do?

M66 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Variable acceleration control: Cutting feed rate. Set the cutting feed rate for variable acceleration control. When “0” is set, the value set at parameter L74 is assumed. [Related parameters] L74

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the cutting feed rate for variable acceleration control. When “0” is set, the value set at parameter L74 is assumed. [Related parameters] L74

Setting

Setting range0 to 255

Unitmm/min

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 80, 521. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →