What is the setting range of Mazak parameter M67?

0 to 99999999 (unit: mm/min (°/min)). A changed value takes effect: After stop of movement.

PARAMMachine parameter · FEED VEL. (M)

M67

Rapid traverse rate limit in orbit machining

Q: What does Mazak parameter M67 do?

M67 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Rapid traverse rate limit in orbit machining. Set the limit for the rapid traverse rate in orbit machining. When “0” is set for M67 or the value set for M67 is larger than M1, the rapid traverse rate is clamped at the value set for M1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the limit for the rapid traverse rate in orbit machining. When “0” is set for M67 or the value set for M67 is larger than M1, the rapid traverse rate is clamped at the value set for M1.

Setting

Setting range0 to 99999999

Unitmm/min (°/min)

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 80, 522. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →