What is the setting range of Mazak parameter M7?

±99999999 (unit: 0.0001 mm). A changed value takes effect: After stop of movement.

PARAMMachine parameter · FEED VEL. (M)

Fourth zero-point coordinating value

Q: What does Mazak parameter M7 do?

M7 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Fourth zero-point coordinating value. The machine coordinating values of the point to which each axis is to move back under the G30P4 command (fourth zero-point return).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The machine coordinating values of the point to which each axis is to move back under the G30P4 command (fourth zero-point return).

Setting

Setting range±99999999

Unit0.0001 mm

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 78, 506. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →