What is the setting range of Mazak parameter M8?

±99999999 (unit: 0.0001 mm/0.0001°). A changed value takes effect: After stop of movement.

PARAMMachine parameter · FEED VEL. (M)

Maximum software limit specified by manufacturer (+ direction)

Q: What does Mazak parameter M8 do?

M8 is a Machine parameter in the FEED VEL. group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum software limit specified by manufacturer (+ direction). The maximum moving zone permissible under the machine specifications Set the machine coordinate values. Example : Note : This parameter is invalid when M8 = M9.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The maximum moving zone permissible under the machine specifications Set the machine coordinate values. Example : Note : This parameter is invalid when M8 = M9.

Setting

Setting range±99999999

Unit0.0001 mm/0.0001°

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 78, 507. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →