What is the setting range of Mazak parameter MS27?

0 to 50 (unit: %). A changed value takes effect: At power on.

PARAMMachine parameter · MACHINE STRUCTURE (MS)

MS27

Spindle speed fluctuation function Fluctuation amplitude Initial value

Q: What does Mazak parameter MS27 do?

MS27 is a Machine parameter in the MACHINE STRUCTURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Spindle speed fluctuation function Fluctuation amplitude Initial value. Sets the initial fluctuation amplitude with respect to the specified speed for the spindle speed fluctuation function. Note : If 0 is set, 1% is assumed. If 50 or greater is set, 50 is assumed.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the initial fluctuation amplitude with respect to the specified speed for the spindle speed fluctuation function. Note : If 0 is set, 1% is assumed. If 50 or greater is set, 50 is assumed.

Setting

Setting range0 to 50

Unit%

Program typeE

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 95, 606. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →