What is the setting range of Mazak parameter N10?

0 to 32767 (unit: mm (0.001°)). A changed value takes effect: At power on.

PARAMMachine parameter · TIME CONST. (N)

N10

Grid spacing

Q: What does Mazak parameter N10 do?

N10 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Grid interval. Set the grid interval of the detector. Usually, set the same value as the ball screw pitch. However, set the grid interval of the detector if the grid interval differs from the pitch.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Grid interval

Set the grid interval of the detector. Usually, set the same value as the ball screw pitch. However, set the grid interval of the detector if the grid interval differs from the pitch.

Setting

Setting range0 to 32767

Unitmm (0.001°)

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 81, 525. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →