What is the setting range of Mazak parameter N2?

4 to 1800 (unit: ms). A changed value takes effect: Immediate.

PARAMMachine parameter · TIME CONST. (N)

Cutting-feed time constant (linear acceleration/deceleration)

Q: What does Mazak parameter N2 do?

N2 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Cutting-feed time constant (linear acceleration/deceleration). Set the time constant to obtain linear acceleration/deceleration of the cutting feed rate. Note : This parameter is valid only when bit 4 of M21 is 1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the time constant to obtain linear acceleration/deceleration of the cutting feed rate. Note : This parameter is valid only when bit 4 of M21 is 1.

Setting

Setting range4 to 1800

Unitms

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 81, 523. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →