What does Mazak parameter N21 do?

N21 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). 8 bit settings.

What is the setting range of Mazak parameter N21?

Binary, eight digits. A changed value takes effect: At power on.

Which bits does Mazak parameter N21 have?

Bit 0: Linear-type rotational axis Bit 1: Rotational axis shortcut Invalid/Valid Bit 2: Fixed value (0) Bit 3: Fixed value Bit 4: Reference axis for superposition control Bit 5: Superposition axis for superposition control Bit 6: Relative polarity of control axis Bit 7: Current position immediately after cross machining

‹ALARMSMazatrol Assistant

PARAMMachine parameter · TIME CONST. (N)

N21

TIME CONST. bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — N21 is set bit by bit

bit 0
Linear-type rotational axis
Takes effect: At power on
bit 1
Rotational axis shortcut Invalid/Valid
Takes effect: At power on
bit 2
Fixed value (0)
Takes effect: At power on
bit 3
Fixed value
Takes effect: At power on
bit 4
Reference axis for superposition control
Takes effect: At power on
bit 5
Superposition axis for superposition control
Takes effect: At power on
bit 6
Relative polarity of control axis
Takes effect: At power on
bit 7
Current position immediately after cross machining
Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 81, 527. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →