What does Mazak parameter N22 do?

N22 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). 5 bit settings.

Which bits does Mazak parameter N22 have?

Bit 0: Axis selection for 3D interference check during automatic operation and for positioning on the VIRTUAL MACHINING display Bit 1: Turret C-axis specification (for 3D interference check during automatic operation and for virtual machining) Bit 2: Axis for which the axis name is specified with a comma Bit 3: Fixed value Bit 4: Fixed value

‹ALARMSMazatrol Assistant

PARAMMachine parameter · TIME CONST. (N)

N22

TIME CONST. bit settings (5 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — N22 is set bit by bit

bit 0
Axis selection for 3D interference check during automatic operation and for positioning on the VIRTUAL MACHINING display
0: Positioning 1: No positioning
Range 0, 1 · Takes effect: At power on
bit 1
Turret C-axis specification (for 3D interference check during automatic operation and for virtual machining)
Turret C-axis specification 0: Turning spindle side 1: Tool side
Range 0, 1 · Takes effect: At power on
bit 2
Axis for which the axis name is specified with a comma
Select whether or not to perform the command of an axis whose name is specified with a comma, “ ’,U ”, “ ’,V ” or “ ’,W ”. (The “ ’,V ” axis command is not dependent on the set value.) 0: Do not perform 1: Perform
Range 0, 1 · Takes effect: At power on
bit 3
Fixed value
bit 4
Fixed value

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 81, 82, 527, 528. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →