What is the setting range of Mazak parameter N26?

±32768. A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · TIME CONST. (N)

N26

Accuracy coefficient for deceleration rate calculation

Q: What does Mazak parameter N26 do?

N26 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Time constant for deceleration rate calculation. Set the maximum allowable value, Amax, for the acceleration occurring between blocks. Amax = × 60 × 1000 × Note : If M27 = 0, M27 is regarded as equal to M1 (rapid feed rate). If N25 = 0, N25 is regarded as equal to N1 (rapid feed time constant)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Time constant for deceleration rate calculation

Set the maximum allowable value, Amax, for the acceleration occurring between blocks. Amax = × 60 × 1000 × Note : If M27 = 0, M27 is regarded as equal to M1 (rapid feed rate). If N25 = 0, N25 is regarded as equal to N1 (rapid feed time constant)

Setting

Setting range±32768

Unit—

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 82, 529. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →