What is the setting range of Mazak parameter N28?

4 to 1800 (unit: ms). A changed value takes effect: After stop of movement.

PARAMMachine parameter · TIME CONST. (N)

N28

Cutting feed time constant for superposition

Q: What does Mazak parameter N28 do?

N28 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Cutting feed time constant for superposition. Set the cutting feed (linear acceleration/deceleration) time constant for superposition control. Note : Set the same value for all axes.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the cutting feed (linear acceleration/deceleration) time constant for superposition control. Note : Set the same value for all axes.

Setting

Setting range4 to 1800

Unitms

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 82, 529. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →