What is the setting range of Mazak parameter N3?

4 to 5000 (unit: ms). A changed value takes effect: Immediate.

PARAMMachine parameter · TIME CONST. (N)

Rapid-feed time constant (First-order lag)

Q: What does Mazak parameter N3 do?

N3 is a Machine parameter in the TIME CONST. group of the MAZATROL SmoothX control (INTEGREX e-670H). Rapid-feed time constant (First-order lag). First-order lag time constant for rapid-feed acceleration/deceleration Speed Speed M1 M1 N3 N3 N3 N3 × 2 Note : This parameter is valid only when either bit 1, 2 or 3 of M21 is 1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

First-order lag time constant for rapid-feed acceleration/deceleration Speed Speed M1 M1 N3 N3 N3 N3 × 2 Note : This parameter is valid only when either bit 1, 2 or 3 of M21 is 1.

Setting

Setting range4 to 5000

Unitms

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 81, 523. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →